And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:15.894
And
I configure APT to prefer an old version of cowsay
0.005
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
5.367
And
I accept adding "cowsay" to Additional Software
5.163
And
Additional Software is correctly configured for package "cowsay"
0.545
And
I shutdown Tails and wait for the computer to power off
4.119
And
I start Tails from USB drive "__internal" with network unplugged
34.945
And
I enable persistence
13.476
And
I configure APT to prefer an old version of cowsay
0.005
And
I disable the tails-virt-notify-user.service user unit
0.041
And
I log in to a new session
8.344
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.169
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.041
And
I prepare the Additional Software upgrade process to fail
0.069
And
the network is plugged
0.028
And
available upgrades have been checked
1.093
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.259
And
I can open the Additional Software configuration window from the notification
2.562
And
I shutdown Tails and wait for the computer to power off
16.461
And
I start Tails from USB drive "__internal" with network unplugged
35.284
And
I enable persistence
11.462
And
I configure APT to prefer an old version of cowsay
0.008
And
I log in to a new session
8.347
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.134
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.040
And
the network is plugged
0.027
Then
the Additional Software upgrade service has started
0.041
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.056