And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:21.612
And
I configure APT to prefer an old version of cowsay
0.007
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
5.391
And
I accept adding "cowsay" to Additional Software
5.056
And
Additional Software is correctly configured for package "cowsay"
0.634
And
I shutdown Tails and wait for the computer to power off
4.091
And
I start Tails from USB drive "__internal" with network unplugged
35.078
And
I enable persistence
12.574
And
I configure APT to prefer an old version of cowsay
0.005
And
I disable the tails-virt-notify-user.service user unit
0.047
And
I log in to a new session
9.024
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.154
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.033
And
I prepare the Additional Software upgrade process to fail
0.046
And
the network is plugged
0.029
And
available upgrades have been checked
1.096
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.824
And
I can open the Additional Software configuration window from the notification
2.578
And
I shutdown Tails and wait for the computer to power off
12.895
And
I start Tails from USB drive "__internal" with network unplugged
33.985
And
I enable persistence
12.047
And
I configure APT to prefer an old version of cowsay
0.006
And
I log in to a new session
9.624
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.136
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.037
And
the network is plugged
0.025
Then
the Additional Software upgrade service has started
0.065
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.076