And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:27.436
And
I configure APT to prefer an old version of cowsay
0.008
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
5.195
And
I accept adding "cowsay" to Additional Software
5.165
And
Additional Software is correctly configured for package "cowsay"
0.684
And
I shutdown Tails and wait for the computer to power off
3.961
And
I start Tails from USB drive "__internal" with network unplugged
34.192
And
I enable persistence
12.319
And
I configure APT to prefer an old version of cowsay
0.004
And
I disable the tails-virt-notify-user.service user unit
0.046
And
I log in to a new session
8.987
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.175
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.048
And
I prepare the Additional Software upgrade process to fail
0.048
And
the network is plugged
0.024
And
available upgrades have been checked
1.122
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
1.902
And
I can open the Additional Software configuration window from the notification
2.593
And
I shutdown Tails and wait for the computer to power off
14.240
And
I start Tails from USB drive "__internal" with network unplugged
35.033
And
I enable persistence
12.834
And
I configure APT to prefer an old version of cowsay
0.007
And
I log in to a new session
8.235
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.238
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.049
And
the network is plugged
0.036
Then
the Additional Software upgrade service has started
0.067
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.056