And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:18.214
And
I configure APT to prefer an old version of cowsay
0.005
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
5.561
And
I accept adding "cowsay" to Additional Software
5.234
And
Additional Software is correctly configured for package "cowsay"
0.605
And
I shutdown Tails and wait for the computer to power off
2.592
And
I start Tails from USB drive "__internal" with network unplugged
35.274
And
I enable persistence
11.744
And
I configure APT to prefer an old version of cowsay
0.005
And
I disable the tails-virt-notify-user.service user unit
0.051
And
I log in to a new session
8.676
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.207
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.052
And
I prepare the Additional Software upgrade process to fail
0.060
And
the network is plugged
0.030
And
available upgrades have been checked
1.120
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.536
And
I can open the Additional Software configuration window from the notification
2.579
And
I shutdown Tails and wait for the computer to power off
18.377
And
I start Tails from USB drive "__internal" with network unplugged
34.396
And
I enable persistence
11.568
And
I configure APT to prefer an old version of cowsay
0.007
And
I log in to a new session
8.576
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.169
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.043
And
the network is plugged
0.029
Then
the Additional Software upgrade service has started
0.041
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.060