And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:21.341
And
I configure APT to prefer an old version of cowsay
0.007
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
6.315
And
I accept adding "cowsay" to Additional Software
5.112
And
Additional Software is correctly configured for package "cowsay"
0.507
And
I shutdown Tails and wait for the computer to power off
4.046
And
I start Tails from USB drive "__internal" with network unplugged
33.000
And
I enable persistence
13.116
And
I configure APT to prefer an old version of cowsay
0.005
And
I disable the tails-virt-notify-user.service user unit
0.044
And
I log in to a new session
7.634
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.166
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.046
And
I prepare the Additional Software upgrade process to fail
0.042
And
the network is plugged
0.028
And
available upgrades have been checked
0.077
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
1.363
And
I can open the Additional Software configuration window from the notification
2.469
And
I shutdown Tails and wait for the computer to power off
17.695
And
I start Tails from USB drive "__internal" with network unplugged
33.002
And
I enable persistence
11.213
And
I configure APT to prefer an old version of cowsay
0.005
And
I log in to a new session
7.909
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.172
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.046
And
the network is plugged
0.028
Then
the Additional Software upgrade service has started
0.055
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.053