And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:17.959
And
I configure APT to prefer an old version of cowsay
0.005
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
5.465
And
I accept adding "cowsay" to Additional Software
5.244
And
Additional Software is correctly configured for package "cowsay"
0.460
And
I shutdown Tails and wait for the computer to power off
3.839
And
I start Tails from USB drive "__internal" with network unplugged
34.406
And
I enable persistence
12.451
And
I configure APT to prefer an old version of cowsay
0.005
And
I disable the tails-virt-notify-user.service user unit
0.047
And
I log in to a new session
8.052
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.203
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.046
And
I prepare the Additional Software upgrade process to fail
0.031
And
the network is plugged
0.026
And
available upgrades have been checked
1.098
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
1.310
And
I can open the Additional Software configuration window from the notification
2.423
And
I shutdown Tails and wait for the computer to power off
13.002
And
I start Tails from USB drive "__internal" with network unplugged
36.146
And
I enable persistence
12.575
And
I configure APT to prefer an old version of cowsay
0.004
And
I log in to a new session
7.658
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.150
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.048
And
the network is plugged
0.025
Then
the Additional Software upgrade service has started
0.040
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.056