And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:11.856
And
I configure APT to prefer an old version of cowsay
0.004
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
5.582
And
I accept adding "cowsay" to Additional Software
4.124
And
Additional Software is correctly configured for package "cowsay"
0.447
And
I shutdown Tails and wait for the computer to power off
3.900
And
I start Tails from USB drive "__internal" with network unplugged
32.409
And
I enable persistence
10.309
And
I configure APT to prefer an old version of cowsay
0.004
And
I disable the tails-virt-notify-user.service user unit
0.039
And
I log in to a new session
7.040
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.186
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.040
And
I prepare the Additional Software upgrade process to fail
0.030
And
the network is plugged
0.034
And
available upgrades have been checked
0.038
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.787
And
I can open the Additional Software configuration window from the notification
2.611
And
I shutdown Tails and wait for the computer to power off
17.556
And
I start Tails from USB drive "__internal" with network unplugged
31.476
And
I enable persistence
10.354
And
I configure APT to prefer an old version of cowsay
0.005
And
I log in to a new session
6.610
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.137
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.038
And
the network is plugged
0.022
Then
the Additional Software upgrade service has started
0.037
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.052