And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:15.663
And
I configure APT to prefer an old version of cowsay
0.005
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
5.490
And
I accept adding "cowsay" to Additional Software
4.322
And
Additional Software is correctly configured for package "cowsay"
0.550
And
I shutdown Tails and wait for the computer to power off
2.652
And
I start Tails from USB drive "__internal" with network unplugged
33.597
And
I enable persistence
12.708
And
I configure APT to prefer an old version of cowsay
0.004
And
I disable the tails-virt-notify-user.service user unit
0.032
And
I log in to a new session
7.614
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.166
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.047
And
I prepare the Additional Software upgrade process to fail
0.062
And
the network is plugged
0.035
And
available upgrades have been checked
1.100
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.815
And
I can open the Additional Software configuration window from the notification
2.391
And
I shutdown Tails and wait for the computer to power off
16.812
And
I start Tails from USB drive "__internal" with network unplugged
33.873
And
I enable persistence
12.454
And
I configure APT to prefer an old version of cowsay
0.004
And
I log in to a new session
7.734
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.153
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.050
And
the network is plugged
0.029
Then
the Additional Software upgrade service has started
0.048
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.070