And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:20.552
And
I configure APT to prefer an old version of cowsay
0.010
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
5.660
And
I accept adding "cowsay" to Additional Software
5.311
And
Additional Software is correctly configured for package "cowsay"
0.581
And
I shutdown Tails and wait for the computer to power off
3.962
And
I start Tails from USB drive "__internal" with network unplugged
34.374
And
I enable persistence
12.975
And
I configure APT to prefer an old version of cowsay
0.005
And
I disable the tails-virt-notify-user.service user unit
0.061
And
I log in to a new session
7.328
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.180
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.051
And
I prepare the Additional Software upgrade process to fail
0.051
And
the network is plugged
0.029
And
available upgrades have been checked
1.090
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
1.444
And
I can open the Additional Software configuration window from the notification
2.689
And
I shutdown Tails and wait for the computer to power off
17.952
And
I start Tails from USB drive "__internal" with network unplugged
33.813
And
I enable persistence
11.312
And
I configure APT to prefer an old version of cowsay
0.009
And
I log in to a new session
6.669
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.184
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.033
And
the network is plugged
0.022
Then
the Additional Software upgrade service has started
0.052
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.057