And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:18.181
And
I configure APT to prefer an old version of cowsay
0.006
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
5.988
And
I accept adding "cowsay" to Additional Software
4.872
And
Additional Software is correctly configured for package "cowsay"
0.592
And
I shutdown Tails and wait for the computer to power off
2.634
And
I start Tails from USB drive "__internal" with network unplugged
33.760
And
I enable persistence
11.802
And
I configure APT to prefer an old version of cowsay
0.005
And
I disable the tails-virt-notify-user.service user unit
0.050
And
I log in to a new session
8.811
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.143
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.035
And
I prepare the Additional Software upgrade process to fail
0.044
And
the network is plugged
0.034
And
available upgrades have been checked
1.092
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
1.314
And
I can open the Additional Software configuration window from the notification
2.499
And
I shutdown Tails and wait for the computer to power off
18.124
And
I start Tails from USB drive "__internal" with network unplugged
34.044
And
I enable persistence
11.413
And
I configure APT to prefer an old version of cowsay
0.004
And
I log in to a new session
8.581
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.187
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.041
And
the network is plugged
0.034
Then
the Additional Software upgrade service has started
0.045
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.050