And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:10.584
And
I configure APT to prefer an old version of cowsay
0.005
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
5.493
And
I accept adding "cowsay" to Additional Software
4.135
And
Additional Software is correctly configured for package "cowsay"
0.503
And
I shutdown Tails and wait for the computer to power off
3.929
And
I start Tails from USB drive "__internal" with network unplugged
31.326
And
I enable persistence
10.360
And
I configure APT to prefer an old version of cowsay
0.004
And
I disable the tails-virt-notify-user.service user unit
0.042
And
I log in to a new session
6.497
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.183
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.026
And
I prepare the Additional Software upgrade process to fail
0.042
And
the network is plugged
0.034
And
available upgrades have been checked
1.152
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
1.284
And
I can open the Additional Software configuration window from the notification
2.614
And
I shutdown Tails and wait for the computer to power off
17.482
And
I start Tails from USB drive "__internal" with network unplugged
32.246
And
I enable persistence
10.481
And
I configure APT to prefer an old version of cowsay
0.004
And
I log in to a new session
7.293
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.147
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.038
And
the network is plugged
0.031
Then
the Additional Software upgrade service has started
0.047
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.053