And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:16.511
And
I configure APT to prefer an old version of cowsay
0.005
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
5.308
And
I accept adding "cowsay" to Additional Software
4.224
And
Additional Software is correctly configured for package "cowsay"
0.531
And
I shutdown Tails and wait for the computer to power off
2.559
And
I start Tails from USB drive "__internal" with network unplugged
33.073
And
I enable persistence
10.459
And
I configure APT to prefer an old version of cowsay
0.005
And
I disable the tails-virt-notify-user.service user unit
0.037
And
I log in to a new session
8.437
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.152
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.035
And
I prepare the Additional Software upgrade process to fail
0.035
And
the network is plugged
0.025
And
available upgrades have been checked
0.055
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
1.933
And
I can open the Additional Software configuration window from the notification
2.420
And
I shutdown Tails and wait for the computer to power off
17.642
And
I start Tails from USB drive "__internal" with network unplugged
33.064
And
I enable persistence
10.909
And
I configure APT to prefer an old version of cowsay
0.004
And
I log in to a new session
6.855
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.185
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.032
And
the network is plugged
0.024
Then
the Additional Software upgrade service has started
0.045
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.061