And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:17.276
And
I configure APT to prefer an old version of cowsay
0.016
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
6.333
And
I accept adding "cowsay" to Additional Software
5.108
And
Additional Software is correctly configured for package "cowsay"
0.482
And
I shutdown Tails and wait for the computer to power off
4.054
And
I start Tails from USB drive "__internal" with network unplugged
33.280
And
I enable persistence
11.338
And
I configure APT to prefer an old version of cowsay
0.005
And
I disable the tails-virt-notify-user.service user unit
0.064
And
I log in to a new session
7.907
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.238
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.041
And
I prepare the Additional Software upgrade process to fail
0.033
And
the network is plugged
0.035
And
available upgrades have been checked
2.175
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.785
And
I can open the Additional Software configuration window from the notification
2.575
And
I shutdown Tails and wait for the computer to power off
16.944
And
I start Tails from USB drive "__internal" with network unplugged
33.218
And
I enable persistence
10.906
And
I configure APT to prefer an old version of cowsay
0.004
And
I log in to a new session
7.479
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.146
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.036
And
the network is plugged
0.023
Then
the Additional Software upgrade service has started
0.049
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.066