And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:15.879
And
I configure APT to prefer an old version of cowsay
0.004
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
5.938
And
I accept adding "cowsay" to Additional Software
4.078
And
Additional Software is correctly configured for package "cowsay"
0.520
And
I shutdown Tails and wait for the computer to power off
2.539
And
I start Tails from USB drive "__internal" with network unplugged
33.005
And
I enable persistence
11.110
And
I configure APT to prefer an old version of cowsay
0.004
And
I disable the tails-virt-notify-user.service user unit
0.067
And
I log in to a new session
7.757
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.181
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.028
And
I prepare the Additional Software upgrade process to fail
0.046
And
the network is plugged
0.024
And
available upgrades have been checked
0.043
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.758
And
I can open the Additional Software configuration window from the notification
2.413
And
I shutdown Tails and wait for the computer to power off
17.659
And
I start Tails from USB drive "__internal" with network unplugged
32.308
And
I enable persistence
11.682
And
I configure APT to prefer an old version of cowsay
0.005
And
I log in to a new session
8.125
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.144
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.040
And
the network is plugged
0.030
Then
the Additional Software upgrade service has started
0.059
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.054