And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:17.533
And
I configure APT to prefer an old version of cowsay
0.004
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
5.080
And
I accept adding "cowsay" to Additional Software
5.238
And
Additional Software is correctly configured for package "cowsay"
0.677
And
I shutdown Tails and wait for the computer to power off
2.792
And
I start Tails from USB drive "__internal" with network unplugged
33.902
And
I enable persistence
12.248
And
I configure APT to prefer an old version of cowsay
0.012
And
I disable the tails-virt-notify-user.service user unit
0.082
And
I log in to a new session
7.652
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.162
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.052
And
I prepare the Additional Software upgrade process to fail
0.042
And
the network is plugged
0.034
And
available upgrades have been checked
1.088
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
1.995
And
I can open the Additional Software configuration window from the notification
2.395
And
I shutdown Tails and wait for the computer to power off
18.051
And
I start Tails from USB drive "__internal" with network unplugged
33.774
And
I enable persistence
12.200
And
I configure APT to prefer an old version of cowsay
0.004
And
I log in to a new session
8.204
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.156
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.031
And
the network is plugged
0.033
Then
the Additional Software upgrade service has started
0.056
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.051