And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:15.922
And
I configure APT to prefer an old version of cowsay
0.011
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
5.565
And
I accept adding "cowsay" to Additional Software
5.088
And
Additional Software is correctly configured for package "cowsay"
0.545
And
I shutdown Tails and wait for the computer to power off
2.606
And
I start Tails from USB drive "__internal" with network unplugged
34.276
And
I enable persistence
16.281
And
I configure APT to prefer an old version of cowsay
0.005
And
I disable the tails-virt-notify-user.service user unit
0.043
And
I log in to a new session
8.664
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.205
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.049
And
I prepare the Additional Software upgrade process to fail
0.048
And
the network is plugged
0.067
And
available upgrades have been checked
0.046
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
2.011
And
I can open the Additional Software configuration window from the notification
2.403
And
I shutdown Tails and wait for the computer to power off
16.941
And
I start Tails from USB drive "__internal" with network unplugged
34.294
And
I enable persistence
12.310
And
I configure APT to prefer an old version of cowsay
0.006
And
I log in to a new session
8.208
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.158
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.034
And
the network is plugged
0.038
Then
the Additional Software upgrade service has started
0.042
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.061