And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:19.254
And
I configure APT to prefer an old version of cowsay
0.005
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
5.837
And
I accept adding "cowsay" to Additional Software
4.869
And
Additional Software is correctly configured for package "cowsay"
0.666
And
I shutdown Tails and wait for the computer to power off
4.064
And
I start Tails from USB drive "__internal" with network unplugged
33.865
And
I enable persistence
11.986
And
I configure APT to prefer an old version of cowsay
0.007
And
I disable the tails-virt-notify-user.service user unit
0.056
And
I log in to a new session
7.115
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.226
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.045
And
I prepare the Additional Software upgrade process to fail
0.039
And
the network is plugged
0.037
And
available upgrades have been checked
1.106
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
1.337
And
I can open the Additional Software configuration window from the notification
2.388
And
I shutdown Tails and wait for the computer to power off
13.278
And
I start Tails from USB drive "__internal" with network unplugged
34.104
And
I enable persistence
11.270
And
I configure APT to prefer an old version of cowsay
0.016
And
I log in to a new session
8.438
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.180
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.038
And
the network is plugged
0.037
Then
the Additional Software upgrade service has started
0.041
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.056