And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:16.072
And
I configure APT to prefer an old version of cowsay
0.005
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
5.853
And
I accept adding "cowsay" to Additional Software
4.040
And
Additional Software is correctly configured for package "cowsay"
0.500
And
I shutdown Tails and wait for the computer to power off
3.936
And
I start Tails from USB drive "__internal" with network unplugged
33.854
And
I enable persistence
10.492
And
I configure APT to prefer an old version of cowsay
0.017
And
I disable the tails-virt-notify-user.service user unit
0.052
And
I log in to a new session
7.330
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.412
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.034
And
I prepare the Additional Software upgrade process to fail
0.056
And
the network is plugged
0.040
And
available upgrades have been checked
1.094
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.405
And
I can open the Additional Software configuration window from the notification
2.537
And
I shutdown Tails and wait for the computer to power off
12.664
And
I start Tails from USB drive "__internal" with network unplugged
32.505
And
I enable persistence
11.755
And
I configure APT to prefer an old version of cowsay
0.005
And
I log in to a new session
6.888
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.128
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.039
And
the network is plugged
0.036
Then
the Additional Software upgrade service has started
0.099
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.044