And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:13.694
And
I configure APT to prefer an old version of cowsay
0.005
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
5.715
And
I accept adding "cowsay" to Additional Software
5.094
And
Additional Software is correctly configured for package "cowsay"
0.538
And
I shutdown Tails and wait for the computer to power off
4.085
And
I start Tails from USB drive "__internal" with network unplugged
33.324
And
I enable persistence
10.504
And
I configure APT to prefer an old version of cowsay
0.008
And
I disable the tails-virt-notify-user.service user unit
0.069
And
I log in to a new session
7.902
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.191
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.030
And
I prepare the Additional Software upgrade process to fail
0.044
And
the network is plugged
0.026
And
available upgrades have been checked
1.083
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
1.280
And
I can open the Additional Software configuration window from the notification
2.436
And
I shutdown Tails and wait for the computer to power off
12.919
And
I start Tails from USB drive "__internal" with network unplugged
33.433
And
I enable persistence
11.389
And
I configure APT to prefer an old version of cowsay
0.005
And
I log in to a new session
7.228
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.415
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.049
And
the network is plugged
0.022
Then
the Additional Software upgrade service has started
0.054
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.062