And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:18.159
And
I configure APT to prefer an old version of cowsay
0.009
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
6.035
And
I accept adding "cowsay" to Additional Software
5.489
And
Additional Software is correctly configured for package "cowsay"
0.629
And
I shutdown Tails and wait for the computer to power off
2.596
And
I start Tails from USB drive "__internal" with network unplugged
33.934
And
I enable persistence
11.455
And
I configure APT to prefer an old version of cowsay
0.006
And
I disable the tails-virt-notify-user.service user unit
0.046
And
I log in to a new session
8.393
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.167
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.055
And
I prepare the Additional Software upgrade process to fail
0.050
And
the network is plugged
0.034
And
available upgrades have been checked
0.050
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
1.876
And
I can open the Additional Software configuration window from the notification
2.539
And
I shutdown Tails and wait for the computer to power off
17.738
And
I start Tails from USB drive "__internal" with network unplugged
32.998
And
I enable persistence
11.567
And
I configure APT to prefer an old version of cowsay
0.004
And
I log in to a new session
7.156
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.162
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.034
And
the network is plugged
0.035
Then
the Additional Software upgrade service has started
0.042
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.056