And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:21.587
And
I configure APT to prefer an old version of cowsay
0.004
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
6.110
And
I accept adding "cowsay" to Additional Software
4.902
And
Additional Software is correctly configured for package "cowsay"
0.620
And
I shutdown Tails and wait for the computer to power off
4.115
And
I start Tails from USB drive "__internal" with network unplugged
34.936
And
I enable persistence
10.961
And
I configure APT to prefer an old version of cowsay
0.005
And
I disable the tails-virt-notify-user.service user unit
0.043
And
I log in to a new session
7.759
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.157
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.037
And
I prepare the Additional Software upgrade process to fail
0.046
And
the network is plugged
0.024
And
available upgrades have been checked
1.107
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
1.321
And
I can open the Additional Software configuration window from the notification
2.400
And
I shutdown Tails and wait for the computer to power off
13.024
And
I start Tails from USB drive "__internal" with network unplugged
34.348
And
I enable persistence
12.356
And
I configure APT to prefer an old version of cowsay
0.005
And
I log in to a new session
8.832
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.188
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.031
And
the network is plugged
0.039
Then
the Additional Software upgrade service has started
0.057
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.053