And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:18.563
And
I configure APT to prefer an old version of cowsay
0.007
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
5.940
And
I accept adding "cowsay" to Additional Software
5.212
And
Additional Software is correctly configured for package "cowsay"
0.543
And
I shutdown Tails and wait for the computer to power off
2.660
And
I start Tails from USB drive "__internal" with network unplugged
34.577
And
I enable persistence
12.004
And
I configure APT to prefer an old version of cowsay
0.004
And
I disable the tails-virt-notify-user.service user unit
0.047
And
I log in to a new session
7.803
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.559
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.034
And
I prepare the Additional Software upgrade process to fail
0.050
And
the network is plugged
0.037
And
available upgrades have been checked
0.069
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
1.358
And
I can open the Additional Software configuration window from the notification
2.410
And
I shutdown Tails and wait for the computer to power off
13.218
And
I start Tails from USB drive "__internal" with network unplugged
35.276
And
I enable persistence
11.350
And
I configure APT to prefer an old version of cowsay
0.004
And
I log in to a new session
8.331
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.397
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.053
And
the network is plugged
0.102
Then
the Additional Software upgrade service has started
0.055
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.043