And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:17.511
And
I configure APT to prefer an old version of cowsay
0.009
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
5.239
And
I accept adding "cowsay" to Additional Software
5.043
And
Additional Software is correctly configured for package "cowsay"
0.582
And
I shutdown Tails and wait for the computer to power off
3.986
And
I start Tails from USB drive "__internal" with network unplugged
34.727
And
I enable persistence
10.961
And
I configure APT to prefer an old version of cowsay
0.006
And
I disable the tails-virt-notify-user.service user unit
0.041
And
I log in to a new session
7.283
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.243
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.047
And
I prepare the Additional Software upgrade process to fail
0.047
And
the network is plugged
0.035
And
available upgrades have been checked
0.042
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
1.374
And
I can open the Additional Software configuration window from the notification
2.429
And
I shutdown Tails and wait for the computer to power off
12.667
And
I start Tails from USB drive "__internal" with network unplugged
34.885
And
I enable persistence
12.212
And
I configure APT to prefer an old version of cowsay
0.008
And
I log in to a new session
8.235
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.215
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.028
And
the network is plugged
0.038
Then
the Additional Software upgrade service has started
0.045
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.062