And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:16.384
And
I configure APT to prefer an old version of cowsay
0.005
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
5.301
And
I accept adding "cowsay" to Additional Software
5.013
And
Additional Software is correctly configured for package "cowsay"
0.546
And
I shutdown Tails and wait for the computer to power off
4.044
And
I start Tails from USB drive "__internal" with network unplugged
35.106
And
I enable persistence
12.330
And
I configure APT to prefer an old version of cowsay
0.008
And
I disable the tails-virt-notify-user.service user unit
0.055
And
I log in to a new session
8.294
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.178
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.038
And
I prepare the Additional Software upgrade process to fail
0.045
And
the network is plugged
0.036
And
available upgrades have been checked
0.054
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
1.900
And
I can open the Additional Software configuration window from the notification
2.596
And
I shutdown Tails and wait for the computer to power off
12.892
And
I start Tails from USB drive "__internal" with network unplugged
35.106
And
I enable persistence
12.909
And
I configure APT to prefer an old version of cowsay
0.006
And
I log in to a new session
8.250
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.173
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.036
And
the network is plugged
0.025
Then
the Additional Software upgrade service has started
0.095
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.080