And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:13.093
And
I configure APT to prefer an old version of cowsay
0.009
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.970
And
I accept adding "cowsay" to Additional Software
2.321
And
Additional Software is correctly configured for package "cowsay"
0.619
And
I shutdown Tails and wait for the computer to power off
2.639
And
I start Tails from USB drive "__internal" with network unplugged
34.129
And
I enable persistence
12.593
And
I configure APT to prefer an old version of cowsay
0.005
And
I disable the tails-virt-notify-user.service user unit
0.047
And
I log in to a new session
6.702
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.533
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.032
And
I prepare the Additional Software upgrade process to fail
0.070
And
the network is plugged
0.026
And
available upgrades have been checked
1.108
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
1.902
And
I can open the Additional Software configuration window from the notification
2.569
And
I shutdown Tails and wait for the computer to power off
12.637
And
I start Tails from USB drive "__internal" with network unplugged
32.979
And
I enable persistence
11.315
And
I configure APT to prefer an old version of cowsay
0.006
And
I log in to a new session
8.354
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.179
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.040
And
the network is plugged
0.026
Then
the Additional Software upgrade service has started
0.039
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.056