And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:19.403
And
I configure APT to prefer an old version of cowsay
0.005
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
5.826
And
I accept adding "cowsay" to Additional Software
4.884
And
Additional Software is correctly configured for package "cowsay"
0.603
And
I shutdown Tails and wait for the computer to power off
3.944
And
I start Tails from USB drive "__internal" with network unplugged
35.774
And
I enable persistence
11.810
And
I configure APT to prefer an old version of cowsay
0.004
And
I disable the tails-virt-notify-user.service user unit
0.046
And
I log in to a new session
7.577
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.184
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.036
And
I prepare the Additional Software upgrade process to fail
0.055
And
the network is plugged
0.050
And
available upgrades have been checked
0.093
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
1.356
And
I can open the Additional Software configuration window from the notification
2.514
And
I shutdown Tails and wait for the computer to power off
12.193
And
I start Tails from USB drive "__internal" with network unplugged
36.278
And
I enable persistence
10.866
And
I configure APT to prefer an old version of cowsay
0.005
And
I log in to a new session
8.706
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.141
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.039
And
the network is plugged
0.022
Then
the Additional Software upgrade service has started
0.039
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.057