And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:16.787
And
I configure APT to prefer an old version of cowsay
0.005
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.711
And
I accept adding "cowsay" to Additional Software
2.489
And
Additional Software is correctly configured for package "cowsay"
0.661
And
I shutdown Tails and wait for the computer to power off
5.386
And
I start Tails from USB drive "__internal" with network unplugged
35.922
And
I enable persistence
12.877
And
I configure APT to prefer an old version of cowsay
0.005
And
I disable the tails-virt-notify-user.service user unit
0.070
And
I log in to a new session
6.859
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.202
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.035
And
I prepare the Additional Software upgrade process to fail
0.033
And
the network is plugged
0.055
And
available upgrades have been checked
0.032
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
1.356
And
I can open the Additional Software configuration window from the notification
2.755
And
I shutdown Tails and wait for the computer to power off
13.245
And
I start Tails from USB drive "__internal" with network unplugged
35.188
And
I enable persistence
12.000
And
I configure APT to prefer an old version of cowsay
0.004
And
I log in to a new session
7.656
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.199
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.049
And
the network is plugged
0.023
Then
the Additional Software upgrade service has started
0.063
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.071