And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:11.075
And
I configure APT to prefer an old version of cowsay
0.004
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
4.998
And
I accept adding "cowsay" to Additional Software
4.004
And
Additional Software is correctly configured for package "cowsay"
0.474
And
I shutdown Tails and wait for the computer to power off
3.962
And
I start Tails from USB drive "__internal" with network unplugged
31.969
And
I enable persistence
10.821
And
I configure APT to prefer an old version of cowsay
0.005
And
I disable the tails-virt-notify-user.service user unit
0.032
And
I log in to a new session
7.429
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.172
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.029
And
I prepare the Additional Software upgrade process to fail
0.058
And
the network is plugged
0.028
And
available upgrades have been checked
0.071
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
2.163
And
I can open the Additional Software configuration window from the notification
2.369
And
I shutdown Tails and wait for the computer to power off
13.874
And
I start Tails from USB drive "__internal" with network unplugged
31.928
And
I enable persistence
9.877
And
I configure APT to prefer an old version of cowsay
0.004
And
I log in to a new session
7.702
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.150
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.039
And
the network is plugged
0.030
Then
the Additional Software upgrade service has started
0.038
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.053