And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:14.085
And
I configure APT to prefer an old version of cowsay
0.005
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
5.718
And
I accept adding "cowsay" to Additional Software
4.118
And
Additional Software is correctly configured for package "cowsay"
0.607
And
I shutdown Tails and wait for the computer to power off
2.595
And
I start Tails from USB drive "__internal" with network unplugged
33.308
And
I enable persistence
11.233
And
I configure APT to prefer an old version of cowsay
0.004
And
I disable the tails-virt-notify-user.service user unit
0.046
And
I log in to a new session
6.776
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.188
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.046
And
I prepare the Additional Software upgrade process to fail
0.034
And
the network is plugged
0.033
And
available upgrades have been checked
1.108
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
1.304
And
I can open the Additional Software configuration window from the notification
2.569
And
I shutdown Tails and wait for the computer to power off
17.852
And
I start Tails from USB drive "__internal" with network unplugged
34.114
And
I enable persistence
10.491
And
I configure APT to prefer an old version of cowsay
0.005
And
I log in to a new session
7.184
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.179
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.042
And
the network is plugged
0.032
Then
the Additional Software upgrade service has started
0.067
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.061