And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:13.827
And
I configure APT to prefer an old version of cowsay
0.005
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
5.413
And
I accept adding "cowsay" to Additional Software
5.135
And
Additional Software is correctly configured for package "cowsay"
0.540
And
I shutdown Tails and wait for the computer to power off
2.526
And
I start Tails from USB drive "__internal" with network unplugged
34.243
And
I enable persistence
11.626
And
I configure APT to prefer an old version of cowsay
0.005
And
I disable the tails-virt-notify-user.service user unit
0.054
And
I log in to a new session
7.662
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.174
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.025
And
I prepare the Additional Software upgrade process to fail
0.035
And
the network is plugged
0.027
And
available upgrades have been checked
1.077
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.526
And
I can open the Additional Software configuration window from the notification
2.593
And
I shutdown Tails and wait for the computer to power off
12.703
And
I start Tails from USB drive "__internal" with network unplugged
32.965
And
I enable persistence
10.748
And
I configure APT to prefer an old version of cowsay
0.005
And
I log in to a new session
7.494
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.478
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.048
And
the network is plugged
0.029
Then
the Additional Software upgrade service has started
0.048
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.061