And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:14.339
And
I configure APT to prefer an old version of cowsay
0.004
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
5.845
And
I accept adding "cowsay" to Additional Software
4.807
And
Additional Software is correctly configured for package "cowsay"
0.494
And
I shutdown Tails and wait for the computer to power off
3.892
And
I start Tails from USB drive "__internal" with network unplugged
32.386
And
I enable persistence
11.286
And
I configure APT to prefer an old version of cowsay
0.004
And
I disable the tails-virt-notify-user.service user unit
0.033
And
I log in to a new session
6.760
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.254
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.045
And
I prepare the Additional Software upgrade process to fail
0.046
And
the network is plugged
0.037
And
available upgrades have been checked
0.051
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
1.337
And
I can open the Additional Software configuration window from the notification
2.536
And
I shutdown Tails and wait for the computer to power off
12.654
And
I start Tails from USB drive "__internal" with network unplugged
33.998
And
I enable persistence
11.423
And
I configure APT to prefer an old version of cowsay
0.005
And
I log in to a new session
8.500
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.132
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.039
And
the network is plugged
0.032
Then
the Additional Software upgrade service has started
0.032
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.055