And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:14.545
And
I configure APT to prefer an old version of cowsay
0.005
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
5.355
And
I accept adding "cowsay" to Additional Software
5.115
And
Additional Software is correctly configured for package "cowsay"
0.457
And
I shutdown Tails and wait for the computer to power off
3.930
And
I start Tails from USB drive "__internal" with network unplugged
33.863
And
I enable persistence
11.376
And
I configure APT to prefer an old version of cowsay
0.005
And
I disable the tails-virt-notify-user.service user unit
0.057
And
I log in to a new session
7.232
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.186
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.035
And
I prepare the Additional Software upgrade process to fail
0.049
And
the network is plugged
0.035
And
available upgrades have been checked
0.043
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
1.311
And
I can open the Additional Software configuration window from the notification
2.393
And
I shutdown Tails and wait for the computer to power off
17.770
And
I start Tails from USB drive "__internal" with network unplugged
33.450
And
I enable persistence
10.941
And
I configure APT to prefer an old version of cowsay
0.004
And
I log in to a new session
8.605
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.164
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.050
And
the network is plugged
0.050
Then
the Additional Software upgrade service has started
0.041
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.059