And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:16.414
And
I configure APT to prefer an old version of cowsay
0.005
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
6.051
And
I accept adding "cowsay" to Additional Software
5.131
And
Additional Software is correctly configured for package "cowsay"
0.541
And
I shutdown Tails and wait for the computer to power off
4.093
And
I start Tails from USB drive "__internal" with network unplugged
35.020
And
I enable persistence
11.759
And
I configure APT to prefer an old version of cowsay
0.008
And
I disable the tails-virt-notify-user.service user unit
0.061
And
I log in to a new session
7.477
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.145
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.046
And
I prepare the Additional Software upgrade process to fail
0.066
And
the network is plugged
0.040
And
available upgrades have been checked
1.113
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
1.309
And
I can open the Additional Software configuration window from the notification
2.645
And
I shutdown Tails and wait for the computer to power off
17.764
And
I start Tails from USB drive "__internal" with network unplugged
34.413
And
I enable persistence
11.368
And
I configure APT to prefer an old version of cowsay
0.005
And
I log in to a new session
7.754
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.186
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.031
And
the network is plugged
0.025
Then
the Additional Software upgrade service has started
0.064
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.066