And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:18.637
And
I configure APT to prefer an old version of cowsay
0.006
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
5.560
And
I accept adding "cowsay" to Additional Software
5.267
And
Additional Software is correctly configured for package "cowsay"
0.514
And
I shutdown Tails and wait for the computer to power off
4.145
And
I start Tails from USB drive "__internal" with network unplugged
34.406
And
I enable persistence
11.626
And
I configure APT to prefer an old version of cowsay
0.008
And
I disable the tails-virt-notify-user.service user unit
0.055
And
I log in to a new session
7.658
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.206
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.038
And
I prepare the Additional Software upgrade process to fail
0.046
And
the network is plugged
0.045
And
available upgrades have been checked
0.046
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
1.319
And
I can open the Additional Software configuration window from the notification
2.423
And
I shutdown Tails and wait for the computer to power off
12.746
And
I start Tails from USB drive "__internal" with network unplugged
33.570
And
I enable persistence
11.707
And
I configure APT to prefer an old version of cowsay
0.005
And
I log in to a new session
8.956
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.149
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.050
And
the network is plugged
0.030
Then
the Additional Software upgrade service has started
0.043
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.059