And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:9.515
And
I configure APT to prefer an old version of cowsay
0.004
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
5.608
And
I accept adding "cowsay" to Additional Software
4.122
And
Additional Software is correctly configured for package "cowsay"
0.463
And
I shutdown Tails and wait for the computer to power off
2.532
And
I start Tails from USB drive "__internal" with network unplugged
32.437
And
I enable persistence
10.643
And
I configure APT to prefer an old version of cowsay
0.017
And
I disable the tails-virt-notify-user.service user unit
0.056
And
I log in to a new session
6.327
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.207
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.029
And
I prepare the Additional Software upgrade process to fail
0.030
And
the network is plugged
0.035
And
available upgrades have been checked
0.030
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
1.852
And
I can open the Additional Software configuration window from the notification
2.602
And
I shutdown Tails and wait for the computer to power off
17.442
And
I start Tails from USB drive "__internal" with network unplugged
31.477
And
I enable persistence
11.437
And
I configure APT to prefer an old version of cowsay
0.004
And
I log in to a new session
6.950
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.180
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.041
And
the network is plugged
0.026
Then
the Additional Software upgrade service has started
0.034
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.048