And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:16.575
And
I configure APT to prefer an old version of cowsay
0.005
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
5.765
And
I accept adding "cowsay" to Additional Software
4.823
And
Additional Software is correctly configured for package "cowsay"
0.775
And
I shutdown Tails and wait for the computer to power off
2.582
And
I start Tails from USB drive "__internal" with network unplugged
34.509
And
I enable persistence
10.849
And
I configure APT to prefer an old version of cowsay
0.006
And
I disable the tails-virt-notify-user.service user unit
0.045
And
I log in to a new session
7.502
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.172
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.031
And
I prepare the Additional Software upgrade process to fail
0.054
And
the network is plugged
0.034
And
available upgrades have been checked
0.060
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
1.950
And
I can open the Additional Software configuration window from the notification
2.425
And
I shutdown Tails and wait for the computer to power off
18.205
And
I start Tails from USB drive "__internal" with network unplugged
34.654
And
I enable persistence
11.913
And
I configure APT to prefer an old version of cowsay
0.008
And
I log in to a new session
7.689
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.192
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.035
And
the network is plugged
0.028
Then
the Additional Software upgrade service has started
0.047
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.066