And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:14.232
And
I configure APT to prefer an old version of cowsay
0.005
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
5.736
And
I accept adding "cowsay" to Additional Software
5.231
And
Additional Software is correctly configured for package "cowsay"
0.642
And
I shutdown Tails and wait for the computer to power off
4.226
And
I start Tails from USB drive "__internal" with network unplugged
33.191
And
I enable persistence
11.729
And
I configure APT to prefer an old version of cowsay
0.005
And
I disable the tails-virt-notify-user.service user unit
0.045
And
I log in to a new session
6.729
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.176
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.041
And
I prepare the Additional Software upgrade process to fail
0.043
And
the network is plugged
0.039
And
available upgrades have been checked
0.043
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
2.934
And
I can open the Additional Software configuration window from the notification
2.399
And
I shutdown Tails and wait for the computer to power off
12.600
And
I start Tails from USB drive "__internal" with network unplugged
33.527
And
I enable persistence
10.979
And
I configure APT to prefer an old version of cowsay
0.005
And
I log in to a new session
7.961
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.159
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.037
And
the network is plugged
0.035
Then
the Additional Software upgrade service has started
0.046
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.052