And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:17.255
And
I configure APT to prefer an old version of cowsay
0.005
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
6.886
And
I accept adding "cowsay" to Additional Software
4.774
And
Additional Software is correctly configured for package "cowsay"
0.639
And
I shutdown Tails and wait for the computer to power off
3.959
And
I start Tails from USB drive "__internal" with network unplugged
35.239
And
I enable persistence
12.046
And
I configure APT to prefer an old version of cowsay
0.005
And
I disable the tails-virt-notify-user.service user unit
0.047
And
I log in to a new session
7.655
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.262
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.070
And
I prepare the Additional Software upgrade process to fail
0.056
And
the network is plugged
0.028
And
available upgrades have been checked
1.121
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
1.312
And
I can open the Additional Software configuration window from the notification
2.426
And
I shutdown Tails and wait for the computer to power off
18.140
And
I start Tails from USB drive "__internal" with network unplugged
35.169
And
I enable persistence
13.367
And
I configure APT to prefer an old version of cowsay
0.005
And
I log in to a new session
7.622
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.127
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.037
And
the network is plugged
0.025
Then
the Additional Software upgrade service has started
0.033
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.065