And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:16.277
And
I configure APT to prefer an old version of cowsay
0.007
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
5.520
And
I accept adding "cowsay" to Additional Software
5.009
And
Additional Software is correctly configured for package "cowsay"
0.593
And
I shutdown Tails and wait for the computer to power off
2.576
And
I start Tails from USB drive "__internal" with network unplugged
32.734
And
I enable persistence
11.166
And
I configure APT to prefer an old version of cowsay
0.004
And
I disable the tails-virt-notify-user.service user unit
0.041
And
I log in to a new session
7.770
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.181
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.048
And
I prepare the Additional Software upgrade process to fail
0.039
And
the network is plugged
0.023
And
available upgrades have been checked
0.095
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
1.380
And
I can open the Additional Software configuration window from the notification
2.645
And
I shutdown Tails and wait for the computer to power off
18.105
And
I start Tails from USB drive "__internal" with network unplugged
33.944
And
I enable persistence
12.034
And
I configure APT to prefer an old version of cowsay
0.005
And
I log in to a new session
8.309
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.215
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.025
And
the network is plugged
0.032
Then
the Additional Software upgrade service has started
0.054
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.053