And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:13.728
And
I configure APT to prefer an old version of cowsay
0.004
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
5.491
And
I accept adding "cowsay" to Additional Software
3.965
And
Additional Software is correctly configured for package "cowsay"
0.443
And
I shutdown Tails and wait for the computer to power off
4.096
And
I start Tails from USB drive "__internal" with network unplugged
32.890
And
I enable persistence
11.498
And
I configure APT to prefer an old version of cowsay
0.004
And
I disable the tails-virt-notify-user.service user unit
0.042
And
I log in to a new session
6.693
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.173
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.039
And
I prepare the Additional Software upgrade process to fail
0.084
And
the network is plugged
0.025
And
available upgrades have been checked
1.125
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.758
And
I can open the Additional Software configuration window from the notification
2.676
And
I shutdown Tails and wait for the computer to power off
13.973
And
I start Tails from USB drive "__internal" with network unplugged
33.765
And
I enable persistence
11.292
And
I configure APT to prefer an old version of cowsay
0.024
And
I log in to a new session
8.139
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.372
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.143
And
the network is plugged
0.105
Then
the Additional Software upgrade service has started
0.039
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.051