And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:18.900
And
I configure APT to prefer an old version of cowsay
0.008
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
5.258
And
I accept adding "cowsay" to Additional Software
4.949
And
Additional Software is correctly configured for package "cowsay"
0.570
And
I shutdown Tails and wait for the computer to power off
3.998
And
I start Tails from USB drive "__internal" with network unplugged
34.729
And
I enable persistence
11.925
And
I configure APT to prefer an old version of cowsay
0.005
And
I disable the tails-virt-notify-user.service user unit
0.043
And
I log in to a new session
7.684
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.225
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.068
And
I prepare the Additional Software upgrade process to fail
0.048
And
the network is plugged
0.027
And
available upgrades have been checked
0.059
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
2.523
And
I can open the Additional Software configuration window from the notification
2.428
And
I shutdown Tails and wait for the computer to power off
18.202
And
I start Tails from USB drive "__internal" with network unplugged
34.137
And
I enable persistence
11.962
And
I configure APT to prefer an old version of cowsay
0.005
And
I log in to a new session
8.621
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.177
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.036
And
the network is plugged
0.050
Then
the Additional Software upgrade service has started
0.044
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.053