And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:19.106
And
I configure APT to prefer an old version of cowsay
0.005
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
5.791
And
I accept adding "cowsay" to Additional Software
4.945
And
Additional Software is correctly configured for package "cowsay"
0.581
And
I shutdown Tails and wait for the computer to power off
3.902
And
I start Tails from USB drive "__internal" with network unplugged
35.033
And
I enable persistence
12.948
And
I configure APT to prefer an old version of cowsay
0.008
And
I disable the tails-virt-notify-user.service user unit
0.056
And
I log in to a new session
7.676
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.256
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.035
And
I prepare the Additional Software upgrade process to fail
0.059
And
the network is plugged
0.030
And
available upgrades have been checked
0.063
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
1.817
And
I can open the Additional Software configuration window from the notification
2.433
And
I shutdown Tails and wait for the computer to power off
18.176
And
I start Tails from USB drive "__internal" with network unplugged
34.861
And
I enable persistence
11.417
And
I configure APT to prefer an old version of cowsay
0.006
And
I log in to a new session
8.429
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.167
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.045
And
the network is plugged
0.027
Then
the Additional Software upgrade service has started
0.055
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.072