And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:16.411
And
I configure APT to prefer an old version of cowsay
0.007
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
5.908
And
I accept adding "cowsay" to Additional Software
4.059
And
Additional Software is correctly configured for package "cowsay"
0.540
And
I shutdown Tails and wait for the computer to power off
2.643
And
I start Tails from USB drive "__internal" with network unplugged
33.579
And
I enable persistence
12.050
And
I configure APT to prefer an old version of cowsay
0.011
And
I disable the tails-virt-notify-user.service user unit
0.075
And
I log in to a new session
8.575
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.168
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.040
And
I prepare the Additional Software upgrade process to fail
0.045
And
the network is plugged
0.024
And
available upgrades have been checked
1.112
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
1.300
And
I can open the Additional Software configuration window from the notification
2.587
And
I shutdown Tails and wait for the computer to power off
17.791
And
I start Tails from USB drive "__internal" with network unplugged
33.816
And
I enable persistence
12.165
And
I configure APT to prefer an old version of cowsay
0.004
And
I log in to a new session
8.588
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.145
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.048
And
the network is plugged
0.037
Then
the Additional Software upgrade service has started
0.039
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.060