And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:16.982
And
I configure APT to prefer an old version of cowsay
0.004
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
5.449
And
I accept adding "cowsay" to Additional Software
5.177
And
Additional Software is correctly configured for package "cowsay"
0.481
And
I shutdown Tails and wait for the computer to power off
3.955
And
I start Tails from USB drive "__internal" with network unplugged
33.590
And
I enable persistence
11.269
And
I configure APT to prefer an old version of cowsay
0.004
And
I disable the tails-virt-notify-user.service user unit
0.049
And
I log in to a new session
7.679
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.183
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.035
And
I prepare the Additional Software upgrade process to fail
0.068
And
the network is plugged
0.028
And
available upgrades have been checked
0.062
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
2.685
And
I can open the Additional Software configuration window from the notification
2.565
And
I shutdown Tails and wait for the computer to power off
12.956
And
I start Tails from USB drive "__internal" with network unplugged
33.612
And
I enable persistence
11.000
And
I configure APT to prefer an old version of cowsay
0.005
And
I log in to a new session
8.826
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.175
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.039
And
the network is plugged
0.032
Then
the Additional Software upgrade service has started
0.076
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.070