And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:14.020
And
I configure APT to prefer an old version of cowsay
0.005
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
5.073
And
I accept adding "cowsay" to Additional Software
5.087
And
Additional Software is correctly configured for package "cowsay"
0.583
And
I shutdown Tails and wait for the computer to power off
2.607
And
I start Tails from USB drive "__internal" with network unplugged
33.205
And
I enable persistence
10.822
And
I configure APT to prefer an old version of cowsay
0.004
And
I disable the tails-virt-notify-user.service user unit
0.042
And
I log in to a new session
8.183
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.127
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.032
And
I prepare the Additional Software upgrade process to fail
0.041
And
the network is plugged
0.037
And
available upgrades have been checked
0.045
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
1.820
And
I can open the Additional Software configuration window from the notification
2.627
And
I shutdown Tails and wait for the computer to power off
12.786
And
I start Tails from USB drive "__internal" with network unplugged
34.051
And
I enable persistence
11.349
And
I configure APT to prefer an old version of cowsay
0.005
And
I log in to a new session
8.106
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.160
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.028
And
the network is plugged
0.027
Then
the Additional Software upgrade service has started
0.056
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.071