And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:16.458
And
I configure APT to prefer an old version of cowsay
0.006
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
5.114
And
I accept adding "cowsay" to Additional Software
5.256
And
Additional Software is correctly configured for package "cowsay"
0.580
And
I shutdown Tails and wait for the computer to power off
3.942
And
I start Tails from USB drive "__internal" with network unplugged
33.267
And
I enable persistence
11.468
And
I configure APT to prefer an old version of cowsay
0.005
And
I disable the tails-virt-notify-user.service user unit
0.057
And
I log in to a new session
7.441
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.322
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.036
And
I prepare the Additional Software upgrade process to fail
0.042
And
the network is plugged
0.035
And
available upgrades have been checked
0.047
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
1.865
And
I can open the Additional Software configuration window from the notification
2.507
And
I shutdown Tails and wait for the computer to power off
17.882
And
I start Tails from USB drive "__internal" with network unplugged
34.613
And
I enable persistence
11.925
And
I configure APT to prefer an old version of cowsay
0.004
And
I log in to a new session
6.859
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.144
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.043
And
the network is plugged
0.026
Then
the Additional Software upgrade service has started
0.052
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.045