And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:11.706
And
I configure APT to prefer an old version of cowsay
0.005
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
5.595
And
I accept adding "cowsay" to Additional Software
4.289
And
Additional Software is correctly configured for package "cowsay"
0.435
And
I shutdown Tails and wait for the computer to power off
3.931
And
I start Tails from USB drive "__internal" with network unplugged
31.435
And
I enable persistence
10.289
And
I configure APT to prefer an old version of cowsay
0.004
And
I disable the tails-virt-notify-user.service user unit
0.030
And
I log in to a new session
7.301
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.161
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.027
And
I prepare the Additional Software upgrade process to fail
0.033
And
the network is plugged
0.036
And
available upgrades have been checked
1.102
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.804
And
I can open the Additional Software configuration window from the notification
2.560
And
I shutdown Tails and wait for the computer to power off
12.522
And
I start Tails from USB drive "__internal" with network unplugged
32.152
And
I enable persistence
10.709
And
I configure APT to prefer an old version of cowsay
0.004
And
I log in to a new session
7.544
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.400
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.043
And
the network is plugged
0.023
Then
the Additional Software upgrade service has started
0.038
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.064