And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:21.481
And
I configure APT to prefer an old version of cowsay
0.006
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
6.115
And
I accept adding "cowsay" to Additional Software
4.742
And
Additional Software is correctly configured for package "cowsay"
0.504
And
I shutdown Tails and wait for the computer to power off
3.956
And
I start Tails from USB drive "__internal" with network unplugged
33.974
And
I enable persistence
11.538
And
I configure APT to prefer an old version of cowsay
0.005
And
I disable the tails-virt-notify-user.service user unit
0.064
And
I log in to a new session
7.391
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.177
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.044
And
I prepare the Additional Software upgrade process to fail
0.047
And
the network is plugged
0.027
And
available upgrades have been checked
0.049
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
1.344
And
I can open the Additional Software configuration window from the notification
2.800
And
I shutdown Tails and wait for the computer to power off
12.894
And
I start Tails from USB drive "__internal" with network unplugged
34.301
And
I enable persistence
11.308
And
I configure APT to prefer an old version of cowsay
0.006
And
I log in to a new session
9.101
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.240
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.040
And
the network is plugged
0.034
Then
the Additional Software upgrade service has started
0.055
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.053