And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:12.709
And
I configure APT to prefer an old version of cowsay
0.005
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
5.470
And
I accept adding "cowsay" to Additional Software
4.826
And
Additional Software is correctly configured for package "cowsay"
0.433
And
I shutdown Tails and wait for the computer to power off
3.931
And
I start Tails from USB drive "__internal" with network unplugged
31.884
And
I enable persistence
10.743
And
I configure APT to prefer an old version of cowsay
0.005
And
I disable the tails-virt-notify-user.service user unit
0.048
And
I log in to a new session
7.235
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.158
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.037
And
I prepare the Additional Software upgrade process to fail
0.067
And
the network is plugged
0.024
And
available upgrades have been checked
1.102
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
1.281
And
I can open the Additional Software configuration window from the notification
2.380
And
I shutdown Tails and wait for the computer to power off
17.415
And
I start Tails from USB drive "__internal" with network unplugged
31.840
And
I enable persistence
10.377
And
I configure APT to prefer an old version of cowsay
0.004
And
I log in to a new session
6.295
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.158
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.023
And
the network is plugged
0.039
Then
the Additional Software upgrade service has started
0.032
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.046