And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:20.001
And
I configure APT to prefer an old version of cowsay
0.005
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
9.309
And
I accept adding "cowsay" to Additional Software
2.568
And
Additional Software is correctly configured for package "cowsay"
0.556
And
I shutdown Tails and wait for the computer to power off
2.584
And
I start Tails from USB drive "__internal" with network unplugged
33.297
And
I enable persistence
10.824
And
I configure APT to prefer an old version of cowsay
0.005
And
I disable the tails-virt-notify-user.service user unit
0.063
And
I log in to a new session
8.353
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.248
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.035
And
I prepare the Additional Software upgrade process to fail
0.046
And
the network is plugged
0.032
And
available upgrades have been checked
1.126
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
1.386
And
I can open the Additional Software configuration window from the notification
2.561
And
I shutdown Tails and wait for the computer to power off
17.221
And
I start Tails from USB drive "__internal" with network unplugged
33.964
And
I enable persistence
12.969
And
I configure APT to prefer an old version of cowsay
0.004
And
I log in to a new session
8.037
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.196
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.096
And
the network is plugged
0.037
Then
the Additional Software upgrade service has started
0.063
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.063